大涡模拟Smagorinsky模型用于磨粒流精密加工喷嘴的质量控制研究

为研究固液两相磨粒流加工喷嘴小孔过程中的流场分布、涡旋形成规律及涡旋的存在对磨粒流加工的影响机制，采用Smagorinsky亚格子模型对磨粒流加工喷嘴小孔的流道进行大涡数值模拟，并使用磨粒流对变直径喷嘴工件进行加工试验。数值模拟发现磨粒流流体中磨粒与壁面的碰撞与剪切作用随流体的速度增大而增大，同一截面的速度存在速度差，其中还伴随涡旋的存在；通过试验研究发现：经固液两相磨粒流加工后的喷嘴小孔表面质量得到明显提高，喷嘴经过四次不同入口速度的磨粒流加工后大孔处表面粗糙度Ra由1.24 μm降至0.542 μm，小孔处表面粗糙度Ra由1.21 μm降至0.437 μm。结论显示固液两相磨粒流加工技术可有效提高被加工喷嘴工件的内表面质量，加工时同一截面的速度存在速度差，速度差的存在利于涡旋的形成，涡旋的存在利于提高磨粒流加工过程的剪切作用，有助于获得高质量的喷嘴小孔内通道表面。     

大口径管道直管段制作技术应用

针对大口径管道施工过程中存在施工周期长,施工难度大,工程成本高等问题,提出一种新型优化管段分段技术和管段组对方案。结果表明:该制作技术能保证大口管道安装施工顺利进行;有效地解决现有大口径套管安装过程中的技术难题。该方法具有创新性、实用性、可靠性等优点,在工程建设的许多领域,具有推广应用价值。     

大口径光学元件装夹转运结构设计及分析

为了实现大口径光学元件的安全装夹、转运,通过光学元件开槽与不开槽两种装夹方式的分析,得出开槽夹紧转运方式将带来微裂纹、应力集中、成本高等缺陷,提出了利用摩擦力克服光学零件的重力和惯性力的低应力装夹转运方案。通过对光学元件低应力夹紧结构设计,并利用有限元分析方法,得到不开槽装夹方式下,光学元件的最大主应力为1.11 MPa,最大切应力为0.73 MPa,远低于光学元件破坏的强度极限,且受力均匀,无应力集中现象。     

半导体激光器辐照损伤效应实验研究进展

半导体激光器(LD)工作在空间辐射或核辐射环境中时,会受到辐照损伤的影响而导致器件性能退化。文章回顾了不同时期研制的LD(从早期的GaAs LD到量子阱LD和量子点LD)在辐照效应实验方面的研究进展,梳理了国际上开展不同辐射粒子或射线(质子、中子、电子、伽马射线)诱发LD辐射敏感参数退化的实验规律,分析总结了当前LD辐照效应实验方法研究中亟待解决的关键技术问题,为今后深入开展LD的辐照效应实验方法、退化规律、损伤机理及抗辐射加固技术研究提供理论指导和实验技术支持。     

一种新型随钻轨迹仪的研制

针对现有随钻轨迹仪工作时间短、需人工同步、"数钻杆"记录钻孔深度不足等问题,采用深度实时测量技术、电源智能管理技术和数据自动同步与成图等关键技术,研制了新型随钻轨迹仪。该仪器由直线位移传感器、压力传感器、霍尔开关等组成,具有钻孔深度自动测量、电源智能管理、测量数据与深度自动匹配等功能。试验结果表明:新型钻孔轨迹仪工作稳定可靠、无需人工干预、工作时间长、生产效率高。     

Selection of Soybean Genotypes by Seed Size and its Prospects for Industrial Raw Material in Indonesia

The main utilization of soybean with large seed size in Indonesia is for industrial (tempeh) raw material. The aim of this research was to select soybean genotypes based on seed size and yield. Experiment was conducted at Jambegede Research Station (Malang), from March until June 2014 using 150 soybean genotypes. The selection revealed the existence of variability among genotypes. A simultaneously selection successfully obtained eight genotypes with yield >2.53 t/ha and seed size > 15.8 g/100 seeds. These selected genotypes prospective for source of tempeh material and need to examine its yield recovery, nutrition (protein) and sensory characteristic.     

大宗粉煤灰的综合利用及提质方案

对于大宗粉煤灰原灰进行分选加球磨机粉磨，同时添加合适的激发剂进行提质，可以生产出不同细度和活性的粉煤灰产品，提升粉煤灰在水泥及商品砼中的用量。介绍了某发电公司的粉煤灰处置现状，在此基础上，对商品砼的粉煤灰性能要求进行了大量市场调研，针对性地给出了该公司粉煤灰的提质方案，最后进行了提质粉煤灰的应用市场和产品竞争力分析。     

R-curves determination of ordinary refractory ceramics assisted by digital image correlation method

As a figure-of-merit, the rising ratio of crack propagation resistance to fracture initiation resistance indicates a reduction of the brittleness and enhances the thermal shock resistance of ordinary refractory ceramics. The significant nonlinear fracture behaviour is related to the development of a fracture process zone (FPZ). The universal dimensionless load–displacement diagram method is applied as a promising graphical method for the determination of R-curves for magnesia refractories showing different brittleness. By applying digital image correlation (DIC) together with the graphical method, the problems arisen with accurate determination of the fracture initiation resistance and the crack length are overcome. Meanwhile, the R-curve is subdivided with respect to the fracture processes, viz the fracture initiation, the development of FPZ and the onset of traction free macro-crack. With the simultaneous crack lengths evaluated from DIC, the contribution of each fracture process to the crack propagation resistance at certain loading stage is quantitatively presented.     

基于多因素耦合分析的冲击地压卸压技术研究

为有效预防ZF2803工作面的冲击地压,本文采用多因素耦合分析法研究了初次来压、见方、煤柱、断层、邻近空区支承压力、煤层厚度变化及巷道底煤等7个因素的单独影响区域及叠加效果,确定了7个危险区:中等冲击危险区4个、强冲击危险区3个,给出了相应的煤层及底板大钻孔预卸压措施,工业性应用取得了良好的防治效果。     

Experimental and numerical analysis of the influence of cable tray arrangements on the resulting mass loss rate and fire spreading

In the context of industrial buildings and power plants, electrical installations and cable trays represent a main fuel load and a potential initial fire source due to possible short circuits or comparable malfunction. Furthermore, a fire can spread from one tray to additional trays mounted above and/or horizontally on one tray. Because of the high significance of cable fires, several research projects have been carried out, investigating the fire behaviour of cables from small‐scale tests, eg, the cone calorimeter, up to large‐scale tests, analysing complete cable tray constructions. The goal of the work presented in this paper is the extension of the knowledge regarding the influence of geometrical parameters like the packing density and tray distance on the burning behaviour and fire spread of cable tray installations. The results are considered, together with test results from the literature, to quantify the main physical parameters describing the burning behaviour. In a next step, the general applicability of these parameters as input data for the parametrization of the source term of numerical simulations is shown. The test results show that the burning behaviour and the fire spreading highly depend on the cable arrangement of the cables on the cable tray, in combination with other boundary conditions. By applying the results as input for a fire simulation, the mass loss rate is considered appropriately.